Pet Polyester Webbing

Overview

Pet Polyester Webbing (SKU: PW-PT-006) is a high-tenacity woven webbing engineered specifically for the pet accessories industry. Constructed from 100% high-strength polyester filament yarn using a dense plain or twill weave, it delivers a consistent flat profile, smooth edges, and a firm hand that holds hardware securely without fraying. The material is designed to withstand repeated tension loads, moisture exposure, and outdoor UV conditions, making it a reliable base material for dog collars, leashes, harnesses, and other load-bearing pet products intended for global wholesale distribution.

Key Features & Specifications

• Material composition: 100% polyester (PET) high-tenacity filament yarn, 900D-1500D depending on width and weave density.
• Standard widths: 10mm, 15mm, 20mm, 25mm (1 inch), 38mm (1.5 inch), and 50mm (2 inch); custom widths available on request.
• Thickness: 1.2mm to 2.5mm, varying by width and specified weave density; standard 25mm webbing runs approximately 1.8mm thick.
• Tensile / breaking strength: 25mm webbing rated at approximately 3,600 lbs (16 kN); 50mm webbing rated at approximately 8,000 lbs (35 kN). Values scale with width and yarn denier.
• Weight: approximately 14-18 g/m for 25mm webbing; approximately 30-36 g/m for 50mm webbing, depending on weave density.
• Abrasion resistance: rated to 20,000+ cycles under Martindale-equivalent testing, retaining structural integrity for high-wear collar and leash applications.
• UV resistance: solution-dyed and UV-stabilized options retain 85-90% color intensity after 500 hours of accelerated UV exposure (QUV testing), minimizing fading in outdoor use.
• Temperature tolerance: stable performance from -40°C to +120°C, with no significant loss of tensile strength across typical outdoor ranges.
• Water and chemical resistance: low moisture absorption (below 1%), resistant to mildew, rot, and most common detergents and pet-safe cleaning agents.
• Elongation at break: approximately 15-25%, providing controlled give under sudden load without permanent deformation.
• Edge finish: heat-sealed or ultrasonically cut edges available to prevent fraying during fabrication and end use.

Applications

• Dog collars and leashes: The combination of high breaking strength and controlled elongation makes this webbing suitable for collars and leashes across small, medium, and large breed categories. The 25mm and 38mm widths are the most commonly specified for standard and heavy-duty collars, while 15mm and 20mm suit small-breed and puppy lines.

• Pet harnesses and vests: Wider profiles (38mm and 50mm) distribute load across the animal's chest and shoulders, reducing pressure points. The firm hand and abrasion resistance support both webbing-only harnesses and webbing-reinforced padded designs.

• Outdoor and working pet gear: UV-stabilized and weather-resistant grades are appropriate for hiking harnesses, service-dog equipment, tracking leads, and hunting gear exposed to sustained sunlight, moisture, and rough terrain.

• Adjustable and tactical accessories: The dimensional stability of the webbing allows for reliable use with tri-glide slides, side-release buckles, and cam locks, making it well suited to adjustable collars, seat-belt restraints, and MOLLE-style tactical pet vests.

• Decorative and branded product lines: With support for printing, jacquard patterns, and a wide color range, the webbing serves fashion collar collections, seasonal ranges, and private-label branded products where visual differentiation matters alongside durability.

Customization & Wholesale

WebbingMaker supplies Pet Polyester Webbing on a wholesale and OEM basis, with production configured to buyer specifications.

• Minimum order quantity: 500m per color/specification for standard stock configurations; 1,000m per color for custom colors, custom widths, or printed designs.
• Custom widths: any width from 8mm to 50mm can be woven to specification, with tolerance held to ±0.5mm.
• Color options: standard color card of 40+ shades available; custom Pantone color matching offered, typically requiring a dye-lot minimum of 1,000m per color.
• Dyeing methods: piece-dyed and solution-dyed (dope-dyed) options; solution-dyed is recommended for outdoor products requiring maximum colorfastness.
• Printing and branding: silk-screen printing, heat-transfer printing, sublimation, and woven jacquard for logos, repeating patterns, and brand names. Reflective yarn and reflective printing available for safety and night-visibility product lines.
• Hardware and finishing: cut-to-length service, heat-sealed ends, and pre-assembly options can be arranged for buyers requiring semi-finished or finished components.
• Packaging: standard rolls of 50m or 100m, wrapped and labeled per buyer requirement; private-label roll labeling and retail-ready packaging available.
• Lead time: 7-15 days for standard stock colors; 20-30 days for custom colors, prints, or non-standard widths, depending on order volume.
• Sampling: existing stock samples provided free of charge (freight collect); custom development samples typically produced within 7-10 days.

Export Capabilities

WebbingMaker exports directly to buyers in North America, Europe, South America, the Middle East, Southeast Asia, and Oceania. Trade terms include FOB, CIF, and EXW, with shipping arranged by sea, air, or express courier according to order size and urgency. The company works with buyers on documentation including commercial invoices, packing lists, certificates of origin, and material test reports, and can support consolidated shipments for buyers sourcing multiple webbing types.

Why Choose WebbingMaker

WebbingMaker operates a vertically integrated production facility covering warping, weaving, dyeing, and finishing, which allows control over quality and consistency at each stage of manufacturing. Incoming yarn is inspected for denier and tenacity, and finished webbing undergoes tensile testing, colorfastness checks, width and thickness verification, and abrasion sampling before release. Batch traceability is maintained so that each shipment can be linked to its production and test records.

The webbing is manufactured to meet the requirements commonly requested by pet-product importers, including REACH and RoHS compliance for restricted substances, and OEKO-TEX Standard 100 certification is available for buyers requiring verified textile safety for products in close contact with animals. Azo-free dyes are used as standard.

With more than a decade of export experience serving pet-brand manufacturers and wholesale distributors, WebbingMaker understands the specification, documentation, and consistency demands of international buyers. Production capacity supports both mid-volume private-label orders and large-scale recurring supply contracts, and a dedicated export team manages order communication, sampling, and logistics in English to keep lead times predictable and quality repeatable across repeat orders.