Tubular Nylon Webbing

Overview

Tubular Nylon Webbing (SKU: NW-TB-002) is a high-tenacity nylon 6,6 webbing manufactured with a hollow, tubular weave construction. Unlike flat solid webbing, the tubular design creates a continuous seamless loop cross-section that folds flat under tension yet retains a soft, pliable hand, allowing the material to conform around carabiners, anchor points, and irregular surfaces without kinking. The double-wall construction distributes tensile loads evenly across both layers, reducing localized stress concentrations and improving fatigue life in dynamic loading applications.

Key Features & Specifications

• Material and construction: 100% high-tenacity nylon 6,6, woven in a continuous tubular (hollow) structure with a tight edge weave to prevent fraying and edge abrasion.
• Available widths: 25mm (approx. 1 inch) and 50mm (approx. 2 inch) standard; flat-folded thickness of approximately 1.6mm to 2.2mm depending on width. Custom widths from 10mm to 75mm available on request.
• Tensile / breaking strength: 25mm width rated at approximately 4,000 lbs (17.8 kN); 50mm width rated at approximately 8,000 lbs (35.6 kN) minimum breaking strength. Values are tested to ASTM D6775 pull-to-break standards.
• Weight: approximately 42 g/m for 25mm and 82 g/m for 50mm, offering a favorable strength-to-weight ratio for load-bearing and life-safety systems.
• Abrasion and UV resistance: nylon 6,6 fiber withstands repeated cyclic abrasion (rated to 20,000+ cycles under Martindale-type testing) and retains roughly 80–85% of tensile strength after 500 hours of accelerated UV exposure. Elongation at break is typically 15–20%, providing controlled shock absorption under dynamic loads.
• Temperature and moisture performance: stable operating range of approximately -40°C to +80°C (-40°F to +176°F), with a nylon melting point near 250°C (482°F). Note that nylon absorbs moisture and may lose roughly 10–15% of tensile strength when fully saturated, recovering strength once dried.

Applications

• Climbing and mountaineering slings: The tubular profile is the traditional choice for sewn and tied runners, extenders, and anchor slings because it folds flat over carabiners and rock edges while maintaining the flexibility needed for a girth hitch or water knot to seat securely.
• Rescue and rope-access systems: Used by fire, mountain, and technical rescue teams for anchor extensions, pick-off straps, and improvised harnesses where dynamic elongation and high breaking strength provide a margin of safety during load transfer.
• Safety harnesses and fall protection: Incorporated into full-body harnesses, positioning lanyards, and industrial fall-arrest assemblies that require both energy absorption and reliable minimum breaking strength under sudden shock loading.
• Load securing and rigging: Applied in cargo restraint, tie-downs, and lifting slings for logistics and industrial handling, where the double-wall construction spreads load and resists edge cutting against sharp corners.
• Tactical, military, and equipment manufacturing: Used in gear attachment systems, equipment straps, and modular load-bearing assemblies that demand durability, abrasion resistance, and consistent tensile performance across production runs.

Customization & Wholesale

WebbingMaker supplies Tubular Nylon Webbing on a wholesale and OEM basis with flexible customization to match buyer specifications:

• Minimum order quantity: 500 meters per color per width for standard stock configurations; custom-engineered specifications typically require a 1,000-meter MOQ.
• Custom widths: available from 10mm to 75mm to suit specific hardware, buckle, and stitching requirements.
• Colors: standard stock colors include black, olive drab, navy, red, orange, and yellow. Custom Pantone (PMS) color matching is available, generally with a 3,000-meter MOQ per custom dye lot to ensure batch consistency.
• Printing and marking: custom logo printing, repeating text, load-rating markings, and metered length indicators can be applied via silk-screen or heat-transfer methods. Woven-in identification stripes are available for higher-volume orders.
• OEM and private label: full private-label service including custom packaging, spool/roll length configuration, barcode labeling, and buyer-specified documentation.
• Packaging: standard supply on 100m, 200m, or 500m rolls; bulk rolls, spools, and cut-to-length pieces available on request. Rolls are individually wrapped in PE film and packed in export cartons.
• Lead time: 7–10 days for in-stock standard colors and widths; 15–25 days for custom widths, colors, or printed runs, depending on order volume.
• Export capability: FOB, CIF, and EXW terms supported. Regular export to North America, Europe, Australia, Southeast Asia, and South America. Standard shipping via sea freight for full-container and LCL orders, with air freight available for samples and urgent shipments. Sample lengths of 1–3 meters are available for qualification and testing prior to bulk commitment.

Why Choose WebbingMaker

WebbingMaker is a dedicated webbing manufacturer with in-house weaving, dyeing, and finishing capacity, allowing direct control over raw material sourcing, production quality, and delivery scheduling without relying on third-party subcontractors.

• Quality control: Every production batch is subject to tensile and breaking-strength testing, width and thickness dimensional checks, colorfastness verification, and visual inspection for weave defects. Batch-level test records are available to buyers on request, and pre-shipment inspection samples can be provided.
• Raw materials: Only high-tenacity nylon 6,6 yarn from established fiber suppliers is used, ensuring consistent tensile performance and dye uptake across production lots.
• Certifications and compliance: Manufacturing operates under an ISO 9001 quality management system. Materials can be produced to meet OEKO-TEX Standard 100 requirements for restricted substances, and REACH compliance documentation is available for shipments to the European market. Load-safety-critical webbing can be produced to buyer-specified standards such as EN 795, EN 566, or CE marking requirements when documentation is provided.
• Export experience: With extensive experience serving global wholesale and industrial buyers, WebbingMaker manages export documentation, customs paperwork, and international logistics coordination, ensuring smooth delivery to buyers in more than 30 countries.
• Consistency and scalability: Standardized production processes and stable raw material supply allow WebbingMaker to maintain color and strength consistency across repeat orders and to scale volume from initial trial runs to full-container-load production.

For product qualification, buyers are encouraged to request physical samples and batch test reports to confirm that Tubular Nylon Webbing (NW-TB-002) meets the specific tensile, dimensional, and compliance requirements of their application before placing a bulk order.